Dating elgin watches by serial number

Well, a study of the available information would help, especially in examining the descriptions and pricing in the ads and catalogs.

Earlier production was simply marked "Adjusted" (to temperature and positions) while "Adjusted 5 Positions" appeared on those produced after 1906-1908. Elgin had an observatory on their grounds at least as early as 1915 and promoted the fact that it was used to "... 270 runs appears on page 596 of the the NAWCC Bulletin No. "The House of Wonders": This silent, black and white movie was made circa 1931 at the Elgin National Watch Company.

Occasionally, Elgin would pull some movements of the 3/4-plate, grade No. check the rating of the Elgin Master Clock by which all Elgin Watches are regulated." This advertising theme continued that year and through the early 1920s. The intricate processes in the manufacture of watch parts and their assembly are shown.

In 1933, Elgin started using a Star to symbolize their watches being "Timed to the Stars", according to the 1935 trade mark registration. Raymond movements were finished this way, too: 41,168,001 - 41,170,000 = 2,000 41,306,001 - 41,308,000 = 2,000 41,442,001 - 41,445,000 = 3,000 41,526,001 - 41,530,000 = 4,000 41,725,001 - 41,727,000 = 0,600 estimated - some not gold flashed Total gold-flashed grade No. This created some uncertainty whether watches so marked were adjusted to six positions or to five positions. "Railroaders' Corner - Elgin Grade 270 Runs," Ed Ueberall and Kent Singer, NAWCC Bulletin No. Also shown are the instruments in an astronomical observatory used to check the time. JEWEL MAKING BY THE ELGIN WATCH CO (73), This film was made during WWII at the Elgin Watch factory. This is an interesting video program on the making of watch jewels at Elgin.

The star was placed on the dials by the late 1930s, as seen on a 1938-1939 Montgomery-Ward catalog page. Raymond Railroad Watch can be seen on the left end of the second row. 478 movements made = 11,600 estimated Elgin followed the practice of just about all of the watch manufacturers, marking all practically all adjusted watches "Adjusted" regardless of the level of watch adjustment until the 1906-1908 era. Elgin literature didn't help with some sources stating "... "Railroaders' Corner - Elgin Grades 149 and 150," Ed Ueberall and Kent Singer, NAWCC Bulletin No. It is available to NAWCC members on loan by mail from the NAWCC Lending Library.

This practice, followed by other manufacturers, obscured the grade of any given movement since it could only be determined by the use of a (strictly confidential) serial number vs. The purpose of this was to protect retail jewelers from discounters insofar as the customer could never be certain that the grade of watch being offered by the discounter was the same as the higher-priced, watch at the retail jeweler's shop. 150 movements were needed, they were created by converting the pendant-set movements already in inventory.

Among the Elgin grades existing in this obscurity were a series of 18-size, 21-jewel, nickel damaskeened, full-plate movements produced in the mid-to-late 1890s and slightly into the early 1900s. They were originally introduced as 20-jewel watches in 1894. Eventually, Elgin started withdrawing the serial numbers of the pendant-set movements which were pulled from inventory and converted from those assigned to the grade No. 277, a grade consisting only of pendant-set movements that had been pulled from inventory and converted to be lever-setting. However these records are not all inclusive, lacking serial numbers of earlier lever-set versions of the No. These were apparently converted prior to the decision to reassign the serial numbers to a different grade number. There is a detailed discussion of these open-face, 18-size, movements and their variations in a 2009-2011 message board thread.Unfortunately, our website is currently unavailable in most European countries.We are engaged on the issue and committed to looking at options that support our full range of digital offerings to the EU market.The practice continued into World War II, as seen on the "Elgin Railroad Watch" shown in the second row, left side, in this 1943 military timepiece ad. Star Timed accuracy ..." slogan continued to be used. Some say that it was done to conserve the nickel normally used for the plates, but nothing definitive appears in Elgin's literature. 581 movements, made for the military, were finished this way. 571's marking to " An early article, The National Watch Company by S. Jeff Sexton's Elgin Watch Serial Numbers webpage provides the grade, size jeweling and other data for the Elgin watches whose serial numbers are entered in the "Movement Serial Number:" field. "Railroaders' Corner - Elgin's Veritas Model - Part 2: The Rest of the Standard Grades," Ed Ueberall and Kent Singer, NAWCC Bulletin No. Other, civilian grades were also gold-flashed, such as the Grade No. Also, Time Antiquarian's Pocket Watch Database provides the grade, size, jeweling and other data for the Elgin watches whose serial numbers are entered. "Railroaders' Corner - Elgin's Veritas Model - Part 1: The First Three Grades," Ed Ueberall and Kent Singer, NAWCC Bulletin No. We continue to identify technical compliance solutions that will provide all readers with our award-winning journalism.

Tags: , ,