Invalidating stale software suspend images gentoo

Once this is done, it will launch a standard Xfce desktop, logged in automatically to the pre-created , please see these notes (the shipped defaults should work fine for most users, however).As of v1.3.1 of this image, you can also use the bundled GUI tool (shown in the screenshot above) to modify (some of) these settings. Be aware that, as shipped, it uses UK locale settings, keyboard mapping, timezone and Wi Fi regulatory domain; however, these are easily changed if desired.If you would like to run benchmarks on your RPi system, please see these notes. Note that AArch64 NEON also has a full IEEE 754-compliant mode (including handling denormalized numbers etc.), there is also no need for flag to fully exploit the FPU either (again, unlike earlier ARM systems).

invalidating stale software suspend images gentoo-42invalidating stale software suspend images gentoo-68

It should exit cleanly when done - if you get a message saying 'No space left on device', then your card is too small for the image, and you should try again with a larger capacity one. Ensure you have peripherals connected (with the display plugged into the HDMI0 port - the one nearer the USB-C power connector - if using an RPi4), and apply power.

You should see the Pi's standard 'rainbow square' on-screen for about 2 seconds, then the display will go blank for about 10 seconds, and then (once the graphics driver has loaded) a text console will appear, showing Open RC starting up.

Install additional MATE Desktop applications that are recommended for extended usage of the MATE Desktop as upstream sees it; for example, this installs MATE Desktop's office related applications.

Disable this if you plan to use your own non-MATE Desktop alternatives or a custom mixture of MATE and non-MATE packages.

It is sensible to install Gentoo to a separate micro SD card from that used by your default Raspbian system; that way, when you are finished using Gentoo, you can simply power off, swap back to your old card, reboot, and your original system will be just as it was.

If you are using a Windows or Mac box, or prefer to use a GUI tool in Linux, I recommend you download your preferred image via your web browser using the links above, and then check out the free, open-source, cross-platform tool Etcher to write it to micro SD card.Here's a screenshot of the image running on a dual-display RPi4 B (click to show a higher resolution view): The image may be downloaded from the link below (or via The previous release versions are still available (together with a detailed changelog) here.If you have a significant amount of work invested in an older release of this image, I have also provided manual upgrade instructions (from 1.0.0 thru 1.4.2 → 1.5.0) here (note that due to the addition of RPi4-compatibility in 1.5.0, you cannot simply upgrade via Please read the instructions below before proceeding.Then, once you've done that, continue reading at "Booting! Assuming that reports 'Good signature', you can proceed.(Warnings that the key is "not certified with a trusted signature" are normal and may be ignored.) Next, insert (into your Linux box) the micro SD card on which you want to install the image, and determine its device path (this will be something like all existing data on the target drive, so please double-check that you have the path correct!See the Gentoo Handbook (here and here) for details on the first three; to customize the Wi Fi regulatory domain, start the , and reboot when prompted.

Tags: , ,